HavenFog Mini Kit
Online Instructions
HavenFog is intended as a one-time treatment. Additional treatment may be needed if a significant mold problem has not yet been remediated or after another water event. Use HavenMist for continued maintenance.
Contents
HavenFog Quart
Mini Fogger
Power Cable
Mold Test Plates
Instruction Sheet
Complete mold treatment is more than just fogging
BioBalance environmental experts have created a treatment guide that walks you through the steps necessary to tackle your mold issue.
Significant Mold
Present in multiple rooms
Widespread Mold
Significant and ongoing issues
Using the Fogger
Step 1: Fill fogger with HavenFog.
Do not overfill reservoir. Place cap back on.
Step 2: Plug into outlet.
Step 3: Fog each room to be treated.
The fogger takes 5 minutes to heat up before producing fog. Fog until you can’t see beyond 3 feet and there is a light film on smooth surfaces.*
Step 4: After 24 hours, clean all horizontal surfaces by HEPA vacuuming, wet mopping, or wet wiping.
*CAUTION: Floors and surfaces are slippery after fogging. If the fogged areas are occupied in the 24 hour period following fogging, eyes & mucous membranes may experience dryness.
Fogger maintenance
Pour remaining HavenFog back into its bottle. Fill the fogger with water and run for 5 to 10 minutes after each use.
Notes
People and pets should not remain in the treatment area for extended periods during fogging. It is best to leave the fog undisturbed for 24 hours after fogging is finished. Re-entry after 12 hours is acceptable. Ventilate the treated areas when people or pets return.
Application takes approximately two hours for a 3,000-square-foot area with the HavenFog Kit, or approximately one hour for a 1,000-square-foot area with the Mini Kit. These estimates cover application only.
Allow up to one hour for preparation, depending on how and where you will apply the fog. Application time depends on the size of the area being treated. Begin small particle cleanup 24 hours after fogging is finished. Cleanup time depends on the area to be cleaned and the thoroughness of the process. The treatment guide walks you through preparation, application, waiting, and cleanup as separate steps.