BioBalance Peroxide Kit

About BioBalance Peroxide Kit

The BioBalance Peroxide Kit is an intensive mold treatment solution designed for one specific job: eliminating visible mold contamination on raw building materials. When you can see mold on wood framing, subflooring, roof decking, trusses, OSB, cinder block, or concrete — this kit gives you everything you need to treat it safely and effectively.

At the heart of the kit is BioBalance H2O2™, a 12% hydrogen peroxide solution. At this concentration, H2O2 acts as a powerful oxidizing agent: it penetrates mold colonies at the cellular level, disrupting fungal cell membranes and neutralizing contamination on contact. Unlike bleach, hydrogen peroxide breaks down into water and oxygen, leaving no toxic residue on treated surfaces.

This product is part of the BioBalance comprehensive mold treatment protocol — selected by Jeff Bookout (CMI, CMRC, AHERA Inspector, 20+ years, 4,000+ mold assessments) and JW Biava (CMI, CMRC, ISEAI Board Member, 100,000+ inspections) as the appropriate tool for visible, surface-level mold remediation on porous building substrates.

What's Included

• BioBalance H2O2™ — 1 gallon of 12% hydrogen peroxide solution, treats up to 1,500 sq. ft. of building-material surface area
• Pump Sprayer — 1-gallon continuous application sprayer with wand and trigger for uniform coverage
• N95 Respirator — one mask for respiratory protection during application
• Nitrile Gloves — one pair for skin protection
• Safety Goggles — one pair for eye protection
• Safety Data Sheet (SDS) — full hazard and handling documentation included with every kit

How Hydrogen Peroxide Treats Mold

Hydrogen peroxide has been used in professional mold remediation for decades. At 12% concentration, H2O2 delivers an oxidative burst that:

• Breaks down fungal cell walls on contact
• Penetrates porous surfaces like wood and concrete where mold roots (hyphae) extend below the visible surface
• Decomposes into water and oxygen — no chlorine residue, no off-gassing of toxic byproducts
• Leaves treated surfaces safe for follow-up Haven fogging or misting treatments

BioBalance H2O2 contains 12% hydrogen peroxide in water, with no stabilizers, surfactants, fragrances, or other additives.

When to Use the Peroxide Kit

The Peroxide Kit is specifically designed for visible mold on raw building materials. It is the first-response tool in a complete mold treatment protocol:

• Wood framing, trusses, joists, crossbeams
• Subflooring, roof decking, OSB and plywood sheets
• Cinder block walls and concrete floors
• Crawl space materials and attic decking

Do NOT use on finished surfaces (painted wood, laminate flooring, fabric, upholstery) — the 12% H2O2 will bleach and degrade organic materials. For finished surfaces, carpeting, and furniture, use HavenClean Solution instead.

Peroxide Kit vs. Haven Fogging Products — Choosing the Right Treatment

BioBalance offers two complementary mold treatment approaches. Here's how to choose:

• BioBalance Peroxide Kit — Use when you have visible mold growth on raw structural materials. The oxidative action of H2O2 targets surface contamination directly and aggressively.
• HavenFog / HavenMist — Use for airborne spores, post-remediation maintenance, and ongoing environmental mold control throughout living spaces. Follow the instructions for the selected product. For HavenFog treatment: People and pets should not remain in the treatment area for extended periods during fogging. It is best to leave the fog undisturbed for 24 hours after fogging is finished. Re-entry after 12 hours is acceptable. Ventilate the treated areas when people or pets return.

Many customers use both: the Peroxide Kit for initial treatment of affected structural areas, followed by HavenFog or HavenMist throughout the home for comprehensive airborne mold control. For guidance on building a complete treatment plan, visit our Mold Treatment Guide: Visible Mold Treatment or start a Custom Treatment Plan.

⚠ Important Safety Information

Read the included Safety Data Sheet (SDS) before handling this product.

1. Danger — Strong Oxidizing Agent: 12% hydrogen peroxide can cause severe skin and eye burns on contact. Wear the included nitrile gloves, N95 respirator, and safety goggles at all times during application.
2. Surface damage risk: H2O2 will bleach and degrade finished surfaces, painted materials, fabrics, and organic materials. Use only on raw, unfinished building materials.
3. Ventilation required: Ensure adequate airflow during and after application. Vacate the treated area and allow to dry fully before re-entry.
4. Safe storage: Store any unused solution away from heat, open flame, and combustible materials in a sealed, cool location. H2O2 degrades with heat and light exposure.
5. Not recommended for chemically sensitive individuals without prior consultation with a credentialed mold inspector or qualified physician.

Frequently Asked Questions

† BioBalance products are designed to support environmental mold management and are not intended to diagnose, treat, cure, or prevent any disease. Results may vary. For significant mold contamination or mold-related health symptoms, consult a qualified physician and a credentialed mold inspector (CMI/CMRC). ImmunoLytics mold test kits are for environmental testing purposes only.