Mold Treatment Guide

Isolated Mold Treatment

When mold is confined to a few rooms or areas, misting will reduce mold and keep it under control. Each HavenMist Kit includes HavenMist, a HavenMister, and plates for testing before and after your treatment.

Isolated Mold Treatment Steps

Choose one of the following kits:

HavenMist™ Kit

The standard HavenMister holds 34 oz (1000 mL) of diluted HavenMist which allows you to treat a small room in about 2 minutes with a reach of 6 feet.

HavenMist™ Large Kit

The Large HavenMister holds 136 oz (4000 mL) of diluted HavenMist which allows you to treat a small room in about 1 minute with a reach of 10 feet.

1. Rip, Remove, Replace 

Rip, remove, replace materials contaminated with visible mold. Use proper conditions (i.e. negative air containment, proper personal protective equipment or PPE, etc.) for your own safety and health. Call our experts at (505) 400-8891 for any guidance needed.

*May require professional remediation. 

2. Test

Sample the area with a mold test. Collect air samples of the areas you will fog. After fogging you will test again and compare the results.

*Additional plates can be purchased at Visit for steps on self-analyzing and interpreting your test.

3. Prep

Prep the area you are treating. Open all cabinets, drawers, closets, etc. for a thorough treatment of the area. 

Our mist solution is water-based. Mist lightly and move any sensitive electronics, papers, artwork, and books.

4. Mist

Mist your environment. Add HavenMist to your mister and thoroughly treat the entire area from ceiling to floor.


Shampoo with HavenClean all carpets, rugs, and fabric furniture before misting.

5. Re-Test

Test for mold after 3 days. After treatment, wait at least 3 days and retest the areas with the included mold plates. Compare the new sample to the previous sample and to the ImmunoLytics health scale* to confirm the treatment was successful. Alternatively, the mold sample can be sent to ImmunoLytics for detailed analysis.

*Visit for steps on self-analyzing and interpreting your test.

6. Maintain Your Environment

Mist your environment as often as needed. To maintain your environment and prevent mold growth, mist. Determine whether your environment needs to be misted again by mold plate testing or if health symptoms return.