Mold Treatment Guide
Surface Treatment
If there is mold in your area, it is in the air. Those mold dust clean-ups will eventually settle on horizontal surfaces, like counters and furniture. HavenWipe is a sanitizing wipe that uses the same natural formula as our fogging and misting solutions and is perfect for cleaning surfaces throughout your home or office.
This surface mold treatment protocol was developed by Jeff Bookout (CMI, CMRC, AHERA Inspector — President of BioBalance with 20+ years and 4,000+ mold assessments) and JW Biava (CMI, CMRC, ISEAI Board Member — CEO of BioBalance and ImmunoLytics Laboratory with 100,000+ inspections). HavenWipe™ is formulated by Walter Hayhurst, RPh (Registered Pharmacist and founder of Professional Compounding Centers of America, PCCA). HavenWipe contains grapefruit seed extract, lemon seed extract, lime seed extract, tangerine seed extract, water, and surfactant. The formula carries a GRAS (Generally Recognized as Safe) designation from the FDA and an MSDS of all zeros, meaning no reportable hazardous components. For more extensive mold scenarios, see our guides on Isolated Mold Treatment, Significant Mold Treatment, Widespread Mold Treatment, and Carpet & Furniture Mold Treatment.
Surface Mold Treatment Steps
HavenWipe™
HavenWipe by BioBalance is for cleaning horizontal surfaces.
Clean Countertops & Furniture
Use enough HavenWipe wipes to keep the treated surface visibly wet for at least one minute, then let it air-dry. Repeat as needed for dirtier surfaces.
Clean Doorknobs
Reduce bacteria spread by keeping your doorknobs and handles clean.
Maintain Washing Machine
High-Efficiency front-loading washing machines have been shown to grow mold if not cleaned and maintained. Use HavenWipe to wipe down your washing machine and prevent the harboring of mold.
Sanitize Sinks
Wipe the sink with HavenWipe. Use enough HavenWipe wipes to keep the treated surface visibly wet for at least one minute, then let it air-dry. Repeat as needed for dirtier surfaces.
Frequently Asked Questions — Surface Mold Treatment
What is HavenWipe and how does it treat mold on surfaces?
HavenWipe™ is a pre-moistened wipe formulated with the same citrus seed extract base as BioBalance’s fogging and misting solutions. Its active compounds disrupt mold on hard surfaces without harsh chemicals, bleach, or synthetic solvents. The formula carries a GRAS (Generally Recognized as Safe) designation and an MSDS rating of all zeros, meaning no reportable hazardous components.
What surfaces can HavenWipe be used on?
HavenWipe is designed for hard, horizontal surfaces throughout the home or office — countertops, tables, desks, doorknobs, handles, faucets, sinks, high-efficiency washing machine drums and seals, and any other non-porous surface where mold spores may settle. For soft surfaces such as carpet and upholstery, use HavenClean™ instead.
Is HavenWipe safe for kitchen countertops and food-prep areas?
Yes. HavenWipe’s citrus seed extract formula has an MSDS rating of all zeros — no reportable hazardous components, no bleach, no ammonia, no synthetic solvents. Allow surfaces to dry before placing food items on them. If you have specific concerns about food-contact surfaces, consult your healthcare provider.
How often should I wipe down surfaces for mold prevention?
In environments with known or suspected mold, treat high-touch and horizontal surfaces daily until mold levels are confirmed reduced. For ongoing prevention, weekly treatment of countertops, sinks, and washing machine drums is recommended. Consider using ImmunoLytics mold test plates before and after treatment to verify progress.
Is HavenWipe safe for chemically sensitive individuals?
HavenWipe is formulated with chemically sensitive individuals in mind. Its GRAS-listed citrus seed extract formula carries an MSDS of all zeros — no hazardous components, no harsh solvents, no synthetic fragrance. Formulated by Walter Hayhurst, RPh (PCCA founder), the product is a non-toxic alternative to conventional disinfecting wipes. If you have a diagnosed sensitivity condition such as CIRS, consult your physician before use.
What is the difference between HavenWipe and HavenFog for mold treatment?
HavenFog™ treats airborne mold spores and surfaces in a whole-room fogging treatment — ideal for significant or widespread mold scenarios. HavenWipe™ is a targeted surface treatment for individual surfaces — ideal for maintenance, spot treatment, or areas where fogging is impractical. Both products use the same citrus-based formula and can be used together as part of a layered mold management protocol.
How do I know if the surface mold treatment is working?
The most reliable way to verify mold reduction is before-and-after mold testing. ImmunoLytics Laboratory — BioBalance’s sister company — offers physician-ordered mold test plates for environmental surfaces. A significant reduction in mold spore counts between pre- and post-treatment tests indicates effective treatment. For professional mold assessment, contact AirWell.
† Health & Safety: HavenWipe is designed to support environmental mold management and is not intended to diagnose, treat, cure, or prevent any disease or medical condition. Results may vary. If you are experiencing mold-related health symptoms, consult a qualified physician. For professional mold assessment and remediation, contact AirWell — BioBalance’s trusted network of credentialed Indoor Environmental Professionals (CMI, CMRC, AHERA) serving AZ, CO, NM, OK, and TX.Also see: dust and particulate clean-up | additional treatment tips